Smart WiFi Cat Feeder with Remote Control

£62.90 GBP

~~£79.90 GBP~~ £62.90 GBP

Sale Sold out

Taxes included. Shipping calculated at checkout.

Size 4L

Type WiFi Single Bowl

Quantity

"Pets are part of our families, which is why we understand how worrying it can be to leave them at home while we're away. Without someone to feed them, they might get hungry or make a mess in the house. But with our 4L automatic pet feeder, you can have peace of mind knowing they'll be taken care of with a healthy diet and good eating habits. This feeder is suitable for small to medium-sized pets and can hold up to 2-3 weeks of food. No more stressing about early mornings, long work hours, or travelling - this WiFi-enabled feeder can be programmed to offer up to 10 meals per day with up to 60 portions per meal. It's easy to use and clean and has a detachable design for convenience. Plus, it can be powered by both batteries and a power adapter (not included). Just a friendly reminder: this feeder is recommended for pets over three months old and should be used indoors, away from direct sunlight

Installation Instructions:
1. Add Food
2. Press the lid button to open and add food
3. Add Desiccant
4. Take off the lid and open the desiccant box, place the desiccant then close it
5. Install the Food Bowl
6. Place the bowl on the ground and the main body stuck down, as the picture shows
7. Power-On: Connect the charging cable to the power supply and type-C charging port at the bottom of the feeder
9.Add Pet dry food and put the lid(Suitable for 4-12mm (0.16-0.47in) diameter dry food)

How to Connect the APP:
1. Download the APP "ROJECO" from the APP store or Android APP Market
2. Then " +Add Device" On the the home page, please connect the device with the reminder
3. Note: Please make sure the Bluetooth is turned on when connecting to the network for the first time.
4. Scan the code to download the "ROJECO" APP

How to schedule feeding plan by APP:
Set the feeding plan in the APP after connecting, it could automatically feed as scheduled, and also can receive feeding records every time.

How to Manual Feeding:
Double-click the manual feeding button then give one portion of the food(about 5g) each time.
(It also can be controlled by an app.)

How to Reset WIFI Connection:
Hold the feeding button for 5 Seconds, the WIFI/Bluetooth indicator flashes quickly then reset succeeds.

Indicator Description:
Green light slowly flashes: Waiting for connection
Green Light stays on: Connected
Red Light slowly flashes: Lack of food
Red light quickly flashes: Feeder is stuck
Red light off: Enough food

Questions & Answers
Question 1: Why network connecting is not successful?
Answer: 1. Confirm whether it is tourist mode, please register for the APP account on first use.

2. Make sure that the network password is entered correctly.
3. Please make sure to use a 2.4G WIFI network, this product does not support 5G WIFI.
4. Please make sure that the WIFI working in good condition, it is recommended that the distance is not more than 20 meters to avoid poor network connection.

Question 2: Why the device cannot be searched?
Answer: If there is no distribution network for a long time after booting, it is possible to search for the device when the network is distributed again, please press the feeding button for 6S, and then add the device to search for the device.

Question3: Why no food dispensed?
Answer: 1. Please check whether remaining food is sufficient.
2. Please make sure that pet food is dry food, this product only supports dry food used.

3. This product can be added to no more than 20% lyophilized food and its size must be less than 12 mm.

4. Please confirm whether the feeding channel is full, it will reduce the number of feeding portions.

5. If the feeder is stuck, please clean it up and go on using it after ensuring the problem is solved.

Question 4: Why does not work after power is supplied?
Answer: 1. Please check whether the plug is correctly connected to the power supply,

2. Whether the machine is connected by type C charging port without problem.

3. Whether the power indicator light is on normally

Product Details

How to Use

Add Food
Press the lid button to open and add food
Add Desiccant
Take off the lid and open the desiccant box, place the desiccant then close it
Install the Food Bowl
Place the bowl on ground and main body stuck down, as the picture shows
Power-On: Connect charging cable to power supply and type-C charging port at the bottom of feeder
Add Pet dry food and put the lid(Suitable for 4-12mm (0.16-0.47in) diameter dry food)